Quick Setting Single Use Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product sets in only 5 minutes.

Pacer Technology Super Glue Quick Setting Epoxy (SY-QS, SYQS8, T-QS, 15250, 15350) works best on:

Initial colour: Clear hazy to light yellow
Final colour: Light yellow
Set Time: 4-6 minutes @ 65-80F
Handling Time: After 30 minutes
Full Strength: 24 hours
Maximum Gap:25"
Hardness, Shore D: 75-83 (After full cure)
Shear Strength, Steel: 1200 psi ( 20%)
Operating Temperature Range: -40oF to +176oF (-40oC to +80oC)

1. Surfaces should be clean and dry, free of oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from containers following package directions and mix thoroughly approximately 1 minute.
4. Apply mixed epoxy to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77F or 25C) with full cure in 24 hours.


SKU 73754152509
Barcode # 73754152509
Brand The Original Super Glue
Shipping Weight 0.0400kg
Shipping Width 0.120m
Shipping Height 0.250m
Shipping Length 0.030m
Unit Of Measure each

Be The First To Review This Product!

Help other Glues Australia users shop smarter by writing reviews for products you have purchased.

Write a product review