SIKA® FILLER 107 | PLASTER FILLER
Premium, wet area, fine surface filler
Fine surface filler that will not rehydrate in humid conditions such as kitchens and bathrooms
Application thickness up to 4mm per layer
Suitable for use in exterior situations when overpainted
Sika® Filler 107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers, etc. in wet environments such as kitchens and bathrooms etc.
CHARACTERISTICS AND ADVANTAGES
Ready to use, no mixing required
High initial tack or grab on plaster and concrete
Not sensitive to moisture
Appearance / Colours Grey / blue, grey paste
Packaging 500 ml plastic tube
5 l and 10 l plastic pail
Storage Conditions / Shelf-Life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging, in dry conditions. Protect from frost.
Chemical Base Filled styrene-acrylate dispersion
Density ~ 1.050 kg/l
Solid Content ~ 62%
Grading Dmax : 0.15 mm
Layer Thickness 4 mm max.
Consumption This depends on the substrate roughness and thickness of the layer applied.
As a guide, ~ 1 l of Sika® Filler-107 can fill ~ 1 m2 per mm thick.
Substrate Quality Clean, free from dust, dry and oil.
Application Conditions / Limitations
Substrate Temperature +5°C min. / +35°C max.
Ambient Temperature +5°C min. / +35°C max.
Mixing Sika® Filler-107 is supplied ready to use - no mixing is required.
Application Method / Tools
Sika® Filler-107 can be applied with a spatula in layer thicknesses from 0 - 4 mm. When filling deep holes or cracks above 4 mm the filler should be applied in several layers and must be allowed to almost dry before each subsequent layer is applied.
Cleaning of Tools Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed.
Waiting Time / Overcoating
Drying Time: 2 to 4 hours (thicker applications might require longer time)
Paintability: Approx. 12 hours
Others Also Bought
More From This Category