A new high-performance epoxy adhesive that applies to wet or dry surfaces for complete waterproof bonding. Trust Selleys Aqua Fix to stick when wet – even underwater
Can be applied to wet and dry surfaces
100% Water resistant
Use on multiple surfaces
Strong durable bonding
Sticks and sets underwater
Withstands thermal and mechanical shocks
Temperature range -15°C (continuous) to +80°C (intermittent)
Dries off white
What materials is this product suitable for?
Most plastics (not for polyethylene, polypropylene)
How to use this product
Ensure surfaces to be bonded are clean, free of grease, dirt and lose materials.
For best results roughen bond area, prior to cleaning.
Carefully cut the sealed tips at the end of the syringe nozzle.
Dispense equal parts onto a clean disposable surface and mix together thoroughly to a uniform colour.
Mixed glue remains usable for 1 hour. Apply mixed glue to both surfaces of the job then bring together.
Do not apply undue strain to bond for 6-8 hours.
Hold joint in place using tapes, clamps or weights if necessary for 24 hours.
When applying underwater ensure mixed glue is pushed onto the surface firmly until the glue displaces water and adheres to surface.
For Aquariums allow to cure for at least 72 hours, then thoroughly wash out with water, drain and refill before introducing fish.
Not approved for contact with drinking water – use Selleys Knead-It Aqua.
Storage and re-use
Place cap from plunger on the nozzle for storage
Clean up uncured Aqua Repair Glue with acetone (nail polish remover)
KEEP OUT OF REACH OF CHILDREN
Avoid contact with skin and eyes
Avoid breathing vapour
Wear eye protection and protective gloves when mixing or using.
This product is classified as hazardous. Avoid contaminating waterways with uncured product.
For frequent hobby or occupational use, refer to the Safety Data Sheet for more information before using the product.
Others Also Bought
More From This Category