Selleys 3 in 1 adhesive, sealant and gap filler is an extremely versatile product – It is perfect for virtually any sealing, bonding and filling applications on virtually any surface. Selleys 3 in 1 is a high strength construction adhesive, a waterproof sealant and no-shrink gap filler – all in one.

Ideal for sealing, bonding and filling almost any material, damp or dry, inside or outside, providing durable waterproof seals, strong bonds and a perfect paintable finish. Excellent adhesion to almost any surface, including glass, metals, timber, brick, concrete, tiles and most plastics* 


As a Construction Adhesive
High strength bond
Water and weather resistant
Use on multiple surfaces

As a Sealant
Provides a lasting waterproof seal
Can be used on all indoor and outdoor surfaces
Easily paintable with 2 coats of water-based paints

As Gap Filler
Highly durable – no shrinkage, long-lasting resistance to cracking and crumbling, water-resistant
Can be used on all indoor and outdoor surfaces
Easily paintable with 2 coats of water-based paints
*Not for polyethylene, polypropylene or Teflon

Where can this product be used?
Use 3 in 1 for sealing, bonding and filling almost any material
Damp or dry, inside or outside
Provides a durable waterproof seal
Provides strong bonds and a perfect paintable finish 

What materials is this product suitable for?
Most plastics (not for polyethylene, polypropylene or teflon)

How to Use
Apply to one surface, in beads for broad surfaces (every 30cm) or dots for small surfaces. Press surfaces together and allow to cure.

Apply product, ensuring it is forced into the joint, with good contact to surfaces. Tool with a soap solution before skinning occurs.

Gap Filler
Apply product into gap. Smooth off with spatula dipped in soapy water. Allow to skin before painting with water-based paints.

Limitations: Not recommended for solvent-based paints. If required, paint with a water-based paint first. 

For neater joints, mask sides before applying sealant and remove tape before sealant skins.
Larger, heavier items need to be supported until the adhesive cures.
Paint with water-based paint. A minimum of two coats are necessary to ensure proper wetting out the sealant surface

Clean up
Uncured product may be removed with mineral turps.
Cured product can be removed by scraping or sanding or with the help of Selleys Silicone Remover. 


SKU 9300697125439
Barcode # 9300697125439
Brand Selleys
Shipping Weight 0.2000kg
Shipping Width 0.050m
Shipping Height 0.100m
Shipping Length 0.050m
Shipping Cubic 0.000250000m3

Be The First To Review This Product!

Help other Glues Australia users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category