Fills cracks and holes up to 10cm in brick, stone, wood, fibre cement, render, concrete, polystyrene, plasterboard, plaster and stucco

Ideal for over-head applications (non-slump formula)

Excellent adhesion to all cementitious surfaces

Suitable for interior and exterior applications

Not suitable for use on damp surfaces

 

Filling Knife

 

Ready to use

Will not shrink or sag

Easy to sand

Accepts nails and screws

Paintable after approx. 2 hours (5 cm layer at 20°C) with a water-based paint

Sandable after 24 hours

Accepts oil-based paints after 48 hours

Maximum layer thickness: 5 cm

Maximum depth: 10 cm

Colour: Light Grey

 

Substrate must be clean, dry, dust and grease free.

Remove all loose material.

Mix well before use.

Product can be used directly from the pot.

Apply the product firmly in to the hole with a filling knife.

For a super smooth result, finish with a damp filling knife.

For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.

Replace cover sheet after use and ensure lid is properly closed.

Once dry sand to a smooth nish.

Clean tools with warm water immediately after use.

Do not store or use under 5°C.