Nordsjö Professional Light and Smooth Super Filler, fills without the need for sanding. Thanks to our unique lightweight technology, our Light and Smooth filler immediately gives you a smooth finish. It does not sag and is easy to model, making it ideal for ceilings and walls.
High performance extra lightweight filler for all general interior and exterior repairs
Fills deep cracks and holes up to 10cm in plasterboard, wood, fiber cement, concrete, brick and most other common building materials
Ideal for over-head applications (non-slump formula)
Ready to use
Will not shrink or sag
Super smooth finish – no sanding required
Paintable with all types of paint
Maximum layer thickness: 5 cm
Maximum depth: 10 cm
Easy to apply and shape
Quick drying: paint after approx. 2 hours (5 cm layer at 20°C) with water-based paints
How to apply
Substrate must be clean, dry, dust and grease free.
Remove all loose materials.
Before application, metal surfaces such as nails and screws should be treated with an appropriate rust resistant primer.
Stir into a smooth paste (if the filler is too dry, just add a few drops of water).
Press filler into hole with a filling knife, smoothing off with a wet filling knife.
For holes deeper than 5 cm, apply in layers, with sufficient drying time between the layers.
No sanding is required. If sanding, wait for 24 hours.
If painting over with an oil-based finish, wait 14 days.
Must be painted over when used outside (minimum 2 coats).
Not suitable for drilling.
Clean tools and hands immediately after use with warm water.
Do not store or use below 5 ° C.
|Unit Of Measure||each|
Others Also Bought
More From This Category