Sealants as good as new in just one step, easy to apply in 5 minutes.

Is the sealant in your bathroom mouldy, yellowish, cracked...? Damaged bathroom sealants can ruin the look of your bathroom. Today you can easily re-new with Loctite RE-NEW. There's no need to be an expert DIYer. You can get a great result thanks to its integrated smoothing tool and innovative silicone formula with anti-mould properties.

Recomended on:Bathroom, shower and kitchen seals

Easily applied over existing joins
Covers discolourations and cracks
Wipes off easily if mistakes are made
Mould resistant
Ready to use in just 6 hour

HOW TO USE:
STEP 1: CLEAN THE DAMAGED SEALANT

No need to remove the existing sealant.
Clean the existing sealant with a damp cloth. Ensure sealant is dry before applying RE-NEW.
If the sealant is too mouldy, use a mould remover first.

STEP 2: APPLY RE-NEW

Apply RE-NEW on top of the existing sealant, holding the tube with the Loctite logo facing towards you.
Shake the tube to bring the RE-NEW content to the bottom.
Gently squeeze to apply RE-NEW. Squezeed too hard? Go over the sealant again without squeezing the tube.

STEP 3: RELAX: YOU CAN REPEAT

Want to try again? Go over the sealant again without squeezing the tube or remove immediately using a damp cloth and start over.
Remove excess sealant from surface or hands with a damp cloth.

STEP 4: THE PERFECTIONIST'S TOUCH

Go over your RE-NEW without squeezing the tube. Thanks to the integrated smoothing tool, the sealant will be smoothed.
Good adhesion to existing sealant including siliconeIce white in colour to cover every damaged sealant

STEP 5: TA-DA!

Clean the smoothing tool with water and a damp cloth.
Let it dry for 6 hours before showering!