WITHSTANDS HEAT UP TO 550°C Holes in mufflers, tailpipes, and engine pipes can be fixed immediately without dismantling
Non-asbestos Hi-Temp Exhaust Repair Bandage is wet and ready to use when removed from the air sealed package. When hardened by exhaust heat, it turns into a hard, long lasting repair.
DIRECTIONS FOR USE:
1. Clean off loose rust and dirt from the damaged area of muffler or tailpipe with sandpaper or a steel wire brush.
2. Remove bandage from the sealed foil packet and wrap the wet bandage around the damaged area with the specially impregnated material against the muffler or tailpipe, overlapping 10-15mm.
3. Support the wrapped bandage temporarily with the enclosed wire until it is heat cured.
4. Idle the motor in the open air for 20-30 minutes. The exhaust heat will harden it to a hard, protective coating.
More From This Category