Gorilla Heavy Duty Mounting Tape is a double-sided tape that mounts in an instant, for a long-lasting, weatherproof bond. The industrial strength double-sided tape delivers a heavy-duty bond that holds up to 30 pounds. Gorilla Heavy Duty Mounting Tape is perfect for indoor and outdoor projects and sticks to smooth and rough surfaces. Completing DIY projects is easy with this tough, double-sided tape. Mount, build, and repair!

Features:
DOUBLE SIDED TAPE – coated with adhesive on both sides for easy hanging.
30lb STRONG HOLD – Sticks to smooth and rough surfaces.*
INSTANT HOLD – Delivers a fast & easy permanent bond.
WEATHERPROOF – For indoor and outdoor use.
BOND: Plastic**, Metal, Wood, Glass, Brick, Ceramic, Stone & More!

Directions:

  • Apply tape to back of object vertically, allowing for even distribution of weight. Avoid touching surface of tape. Note: Apply 2” of tape per 1lb of weight
  • Cut tape and press to secure the tape to object.
  • Remove clear liner and align the object to desired placement.
  • Press firmly, as Gorilla Mounting Tape conforms to the surface and creates a strong, PERMANENT bond.

Specs:

  • APPLICATION TEMPERATURE – above 50° F
  • SERVICE TEMPERATURE – continuous- up to 194° F intermittent- up to 302° F
  • OUTDOOR – Yes
  • MOISTURE RESISTANT – Yes
  • STORAGE TIPS  – Store in a cool, dry location. 64° to 72° F, 30 to 70% RH.

FAQs
Is Gorilla Mounting Tape food safe? Gorilla Mounting Tape is not recommended for direct or indirect food contact and should not be considered food safe. 

How do I remove Gorilla Mounting Tape from my surface? Gorilla Mounting Tape is a permanent tape and may cause surface damage. If the object must be removed, the mounted object must be removed first. This may best be achieved by prying from one corner. Next, the mounting tape can be removed by slowly stretching the tape parallel to the surface.

Will Gorilla Mounting Tape work on plastic/vinyl/rubber? Gorilla Mounting Tape works well on many plastics, however, it does not work on certain low surface energy plastics, such as polyethylene (PE) and polypropylene (PP), or certain types of rubber with high oil or plasticizer content. 

How do I remove the liner on Gorilla Mounting Tape? The liner should be removed once the tape is applied to object. Lift the liner from the corner by using your fingernail, edge of the product blister card, or a blade. The liner may also be removed by pinching and stretching the corner of the Mounting Tape at a 40-degree angle to the surface, until the liner lifts. 

(052427005533)

SKU 052427005533
Barcode # 052427005533
Brand Gorilla
Shipping Weight 0.1000kg
Shipping Width 0.100m
Shipping Height 0.100m
Shipping Length 0.100m
Shipping Cubic 0.001000000m3

Strong and easy to use

By: on 26 August 2019
Reliable, sticks pretty strongly to the surface so make sure you put it right the first time, all good,
(5)

Strong very strong

By: on 19 August 2019
Surprised how strong this thing is, I tested with some weights and my shelves are still up. Used for my garage shelves.
(5)

Write a product review

More From This Category