Get clean, precise application of glues, epoxies, resins, oils, inks, and other liquids with this easy to use 30 ml syringe and blunt tip fill needle. Ideal for workshop, craft room, electronics bench, and on site repair jobs where accuracy matters and mess is not an option.
Why you'll like it
-
Controlled dispensing for dots, lines, seams, and small cavities
-
30 ml capacity for longer runs without constant refilling
-
Graduated barrel with clear volume markings for repeatable dosing
-
Luer lock connection keeps the needle securely attached during use
-
Reusable barrel when used with compatible liquids and cleaned after use
-
Blunt tip needle for safe, non piercing filling and application
Common uses
- Injecting Fix-A-Floor through grout lines to re bond hollow or loose tiles
- Precision placement of two part epoxies and cyanoacrylate gels
- Applying PVA wood glue into tight joints and dowel holes
- Wicking thin adhesives along hairline cracks
- Filling small voids and seams before clamping
- Electronics work with flux, solder paste, and conformal coatings
- Craft, model making, leatherwork, and jewellery repairs
Tile repair tip: A blunt tip of about 2 mm to 3 mm fits most grout lines. Drill a small hole in the grout as directed by the adhesive manufacturer, inject until the cavity is filled, then clean any squeeze out promptly.
What is included
- 1 × 30 ml syringe barrel with plunger
- 1 × blunt tip fill needle with luer lock hub
- 1 × protective cap for storage
Specs
| Capacity |
30 ml |
| Connection |
Luer lock |
| Needle style |
Blunt tip, non piercing |
| Barrel material |
Transparent polypropylene |
| Plunger seal |
Latex free elastomer |
| Use |
For adhesives and shop liquids only, not for medical use |
How to use
- Attach the blunt tip needle by twisting it onto the luer lock until snug.
- Pull back the plunger, draw in your adhesive, then tap the barrel to release trapped air.
- Dispense with slow, steady pressure for consistent beads and dots.
- For Fix-A-Floor, inject through the grout holes until filled and follow the cure steps on the product label.
- After use, expel remaining liquid if suitable, then flush the barrel and needle using a cleaner compatible with your adhesive.
- Dry completely and cap for storage.
Compatibility tips
- Works well with PVA, polyurethane, epoxy, acrylic, latex, and many hobby liquids.
- For solvent based products, confirm compatibility with polypropylene before use.
- Do not store reactive two part mixes inside the syringe after they begin to cure.
Safety
- Not sterile and not for medical, food, or body use.
- Wear gloves and eye protection when handling chemicals.
- Keep out of reach of children.
FAQ
Can I reuse it
Yes, if your adhesive and cleaner are compatible with polypropylene and the luer lock needle. Clean immediately after use for best results.
Will it work with thick glue
Yes, but very thick products may require more pressure and a wider blunt tip size.
Does it come sterile
No. This set is for industrial, workshop, and hobby applications only.
