SikaBond PVA Wooworking Glue Interior & Exterior Bottle 500ml
SikaBond® - PVA is a high solids, one part Cross-linking PVA which meets the D3/BS EN204 specification. SikaBond® - PVA is an ideal product for bonding a wide range of timber components including tongue and groove solid timber and laminated flooring substrates giving tough, flexible permanent bonding.
SikaBond® -PVA can be used on most substrates due to its excellent adhesion. These include:
- MDF boards
- Particle boards
- Ply woods
- Excellent water resistance
- High bond strength within 24 hours
- Suitable for interior and exterior applications
Storage and Shelf Life
Store in a cool, dry place with 25oC maximum condition. This material will keep for at least twelve (12) months.
Instructions for Use
Surface Preparation Surfaces to be bonded should be clean, dry and free from dust and oil. Edges should be squarely machined to ensure maximum contact.
SikaBond® -PVA is to be applied by squeeze bottle, brush or roller. Bonds should be assembled within a few minutes and then tightly clamped or pressed until the adhesive has set. Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
Assemblies are best left overnight before moving or transportation. Maximum bond strength is achieved within 48 hours. Allow floors 24 hours for the adhesive to cure prior to using. SikaBond® -PVA should be used as supplied.
Cleaning Wipe off adhesive squeeze out immediately after assembly with a dry or lightly damp cloth.
Density: 1.08 kg/L
Packaging: 250ml, 500ml, 1L & 5L
-Avoid contact with skin and eyes.
-Wear protective gloves and eye protection during work.
-If skin contact occurs, wash skin thoroughly.
-If in eyes, hold eyes open, flood with warm water, seek medical attention without delay.
-A full Material Safety Data sheet is available from Sika on request.
Important Notification The information, and, in particular, the recommendations relating to the application and end-use of Sika’s products, are given in good faith based on Sika’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The proprietary rights of third parties must be observed. All orders are accepted subject to our terms and conditions of sale. Users should always refer to the most recent issue of the Australian version of the Technical Data Sheet for the product concerned, copies of which will be supplied on request to Sika
|Unit Of Measure||each|
Others Also Bought
More From This Category