Sika Sikaflex 118 Extreme Grab 290ml [White]

Sikaflex®-118 Extreme Grab is a 1- part construction adhesive with very high initial grab which bonds most construction material substrates. Internal and external use.

Very high initial grab

Fixing of heavy objects without temporary fixation

Good workability

Usage

An adhesive to bond most construction components and materials such as:

Concrete

Masonry

Most stones

Ceramic

Wood

Metals

Glass

Mirrors*

Advantages

Very high initial grab

Fixing of heavy objects without temporary fixation

Good workability

Very low emissions

Adhesive-sealant with CE marking

Packaging

290 ml cartridge, 12 cartridges per box

Colour

White

Composition

Silane terminated polymer

Storage conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging.

Density

~1.40 kg/l

Technical Information

Shore A hardness

~50 (after 28 d)

Tensile strength

~2.2 N/mm2

Tear propagation resistance

~10.0 N/mm

Service temperature

−40 °C min. / +80 °C max.

SUBSTRATE PREPARATION

The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which could affect adhesion of the adhesive.

For optimum adhesion and critical, high performance applications the following priming and/or pre-treatment procedures shall be followed:

Non-porous substrates

Aluminium, anodised aluminium, stainless steel, galvanised steel, powder coated metals or glazed tiles, slightly roughen surface with a fine abrasive pad. Clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth.

Before bonding / sealing, allow a waiting time of > 15 minutes (< 6 hours).

Other metals, such as copper, brass and titanium-zinc, clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. After a waiting time of > 15 minutes (< 6 hours). Apply Sika® Primer-3 N applied by brush. Allow a further waiting time of > 30 minutes (< 8 hours) before bonding / sealing.

PVC has to be cleaned and pre-treated using Sika® Primer-215 applied with a brush. Allow a waiting time of > 15 minutes (< 8 hours) before bonding / sealing.

Porous substrates

Concrete, aerated concrete and cement based renders, mortars and bricks, prime surface using Sika® Primer-3 N applied by brush.

Before bonding / sealing, allow a waiting time of > 30 minutes (< 8 hours).

For more detailed advice and instructions contact Sika Technical Services.

Note: Primers are adhesion promoters and not an alternative to improve poor preparation / cleaning of joint surfaces. Primers also improve the long term adhesion performance of a sealed joint.

CLEANING OF EQUIPMENT

Clean all tools and application equipment immediately after use with Sika® Remover-208. Once cured, hardened material can only be removed mechanically.

For cleaning skin use Sika® Hand Wipes.

(7612895530055)

SKU	7612895530055
Barcode #	7612895530055
Brand	Sika
Shipping Weight	0.3000kg
Shipping Width	0.300m
Shipping Height	0.050m
Shipping Length	0.050m
Shipping Cubic	0.000750000m3