Quickset WATERCRETE
Is a unique product that provides a simple, fast, concrete solution to a multitude of awkward repair problems large and small…from re-forming
grating ledges to repairing the Owen Falls Dam in Uganda.

Quickset WATERCRETE is a multi purpose patching cement that sets in five minutes …even underwater! Bonds to concrete, masonry, wood, steel and glass fibre.

Quickset WATERCRETE is an all purpose patching and bonding compound which is very effective where the presence of water makes repairing and sealing difficult. It will repair leaks in pools, tanks and bonds earth ware pipes and tiles, without the need to drain the water. It is ideal for repairs in wet or dry situations where delays are inconvenient as it can be walked on, or driven over in 30 minutes.

Quickset WATERCRETE is a fast setting, high compressive strength compound that shows its initial set in 4-6 minutes, even underwater. It reaches maximum compressive strength in 24 hours and bonds to CLEAN CONCRETE, MASONRY, STONE, TIMBER and STEEL. Contains no calcium chloride. It is suitable for use with drinking water.


BRIEF TECHNICAL SPECIFICATIONS
 Initial set 5 minutes. Curing set 15-30 minutes.
 Compressive strength of 2,000psi or greater in 24 hours
 Maximum strength in 28 days
 Non-toxic
 Volume change: Expansion after 24 hours 0.1%
 Contraction after 28 days 0.01%
 Water absorption 1.7% after 14 days
 Factory Production to BS 5750 Part II

BONDS TO:
 CEMENT
 TIMBER
 MASONRY
 FIBREGLASS
 STEEL

INSTRUCTIONS FOR USE
Remove all loose material from the area to be treated to ensure a solid bond. Slowly add one part of water to 4 parts Quickset WATERCRETE and mix for 1 to 2 minutes to the CONSISTENCY OF PUTTY. Add more product if mix is too wet as wet mix seriously reduces effectiveness. Avoid contact with skin. Press the mix firmly into the prepared area. The product can be moulded to shape. When filling a hole against running water, hold the mixed product in position with a trowel or piece of timber until it cures. The product hardens rapidly after 4 minutes. If sealing a leak underwater, increase the size of the hole on the surface to create a taper. Before applying Quickset WATERCRETE to dry work, generously soak the location with water. Damp conditions assist curing. For repairs less than 1.5cms thick in a dry situation, it is best kept damp for 24 hours.

(9314261001012)

SKU 9314261001012
Barcode # 9314261001012
Brand Prep
Shipping Weight 1.0000kg
Shipping Width 0.100m
Shipping Height 0.200m
Shipping Length 0.100m
Shipping Cubic 0.002000000m3

Be The First To Review This Product!

Help other Glues Australia users shop smarter by writing reviews for products you have purchased.

Write a product review