LOCTITE® MR 5412 is a yellow, neoprene solvent-based contact cement gel used for all types of weather-stripping, porous and non-porous surfaces and general purpose bonding. Typical applications include bonding weather stripping, insulation, rubber and trim to wood and metal.

Suitable for all types of weather-stripping, porous and non-porous surfaces and general purpose bonding

 

% Solids 10

Agency Approvals / Specifications CFIA Listed

Colour Yellow

Fixture Time 15 min.

Key Characteristics Waterproof

Physical Form Liquid

Specific Gravity 0.88 g/l

Specific Gravity Temperature 25 °C

Substrates Metal, Wood

 

1. Clean surfaces thoroughly. Use abrasives to remove any powdery mold release from new weatherstripping.

2. Apply a thin, even film to both surfaces.

3. Allow to dry tacky (3 to 4 minutes).

4. Bond the two surfaces together and apply enough pressure to produce uniform contact.

5. NOTE: The early strength of LOCTITE® MR 5412 is enough to hold most parts together. However, maximum strength is obtained after the adhesive is completely dry.

 

Aging of the bond and exposure to moderate heat increases strength.