1. Pierce seal at end of tube by turning nozzle and cap clockwise.
2. Ensure the working surface is clean, dry, free of dust or any grease. 3. Apply adhesive sparingly to one surface only.
4. Place surfaces together and press firmly for 10 - 60 seconds. Adequate for practical purposes after 30 minutes
5. After use. clean nozzle immediately with a cloth, replace cap and store upright between 5- 25°C. Avoid strong light and heat sources
Not recommended for polyethylene, polyester plastic & glass. Not suitable for use on items which contain hot liquids eg. Cups, mugs. May cause leather to discolour or harden. Test on a hidden area before use if in doubt. For interior use only.
Others Also Bought
More From This Category