High-Performance Future Glue® works exceptionally well with tough jobs.
Surfaces do not need to be cleaned! Its powerful adhesive formula works on dirty, greasy surfaces, and resists high and low temperatures as well as most chemicals. Its instant bonding power can be used for almost all porous and non-porous materials. The medium viscosity penetrates into preassembled and close-fitting parts.
Works best on Aluminum Ceramic China Corkboard Hard & Soft Wood Jewelry Leather Metal Most Plastics Porcelain Pottery Rubber
Initial colour Clear, transparent
Final color: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -650 to 1800F (-540 to 820C)
For best results, surfaces should be clean and dry.
1. Protect clothing and work surfaces (metal foil works well). Use in a well-ventilated area. Carefully follow tube-opening directions on package. Unscrew cap while keeping tube pointed away from the face.
2. Apply to one surface, using 1 drop per square inch of surface. Assemble parts and hold together with pressure for 15 seconds or until set.
3. Wipe the top of nozzle if the adhesive has accumulated before recapping tube securely after use.
STORAGE AND SHELF LIFE:
Store upright in a cool area away from sunlight or heat sources. Stored under these conditions, a one-year shelf life can be expected.
SAFETY AND HANDLING PRECAUTIONS
Contains cyanoacrylate. CAUTION: Eye Irritant. Bonds skin & eyes in seconds. Use with adequate ventilation. Avoid contact with clothing as can cause a burn. In case of eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover & gently peel adhesive off with a fingernail; water exposure will wear off residual adhesive in a few days (do not use polish remover around the eye area). KEEP OUT OF REACH OF CHILDREN.
|Brand||The Original Super Glue|
|Unit Of Measure||each|
More From This Category