Bonds metals, ceramics, concrete, fibreglass, marble and wood. Syringe dispenser accurately measures equal amounts of resin and hardener to prevent wastage. Fast curing, cure commences in five minutes and reaches full cure in one hour. When cured, the bond is transparent and virtually colourless.

Loctite 5 Minute Epoxy Adhesive's premium formulation is solvent-free and 100% solids providing a non-shrink, environmentally friendly bond. High viscosity provides a good gap-filling ability.

DIRECTIONS FOR USE:
1. Surfaces must be clean and dry. If possible, roughen surface with sandpaper to improve keying and bonding.
2. Cut tips of twin nozzle with a sharp knife and remove nozzle cap from syringe plunger.
3. Push the twin plunger to squeeze out equal amounts of resin and hardener in the amounts required. 4. Mix the resin and hardener for one or two minutes until the colour is completely uniform.
5. Apply immediately to both surfaces and press together. Pressure clamping is not necessary, but allow the adhesive to set for at least 5 minutes before moving. Remove any excess adhesive immediately. 6. Important. After dispensing product be certain to insert plug supplied in the nozzle of the syringe to prevent waste. Preferably store in an upright position as packaged.

Structural Bonding - Fast Cure.
Sets in 5 minutes. Sets in 5 minutes. Good chemical resistance.
Fixture time: 4-6 min
Temperature Resistance: Up to 180°F (82°C)