Bondall Paint & Varnish Stripper is a highly effective non-Methylene Chloride stripper ideal for use by inexperienced DIYers as well as professional users. The non-caustic formulation is quick and easy to use, both indoors and out, and can remove multiple layers at a time.
Suitable for use on wood, metal, glass, plaster and concrete. May not be used on plastics. Also suitable for removing old hardened paint from paintbrushes, rollers and tools.
1 Litre is sufficient to strip a surface area of approximately 1 square metre.
Pour a quantity of Bondall Paint & Varnish Stripper into a suitable container. Apply a generous, thick coat at a rate of 1 litre per 1 metre squared, onto the surface to be stripped, with a suitable brush. Leave for approximately 1 hr before applying a second coat. For areas where there are less than 5 layers of paint or varnish, a second coat may not be necessary. Once the stripper has softened the paint, scrape off, leaving surface as clean as possible. Repeat process if necessary. Rub down stripped area using a scrubbing brush or stainless steel pad (DO NOT USE WIRE WOOL). Wash down stripped area with Bondall Waterbased TURPS, or detergent and water. Rinse with clean water and allow to dry.
No drips, runs or waste
Suitable indoor & outdoor use
Others Also Bought
More From This Category