Selleys SolarFlex provides protection from ultraviolet (UV) radiation and other harsh weather elements. Harsh Australian and New Zealand conditions make the choice of an effective solar/weather protection solution critical.

Features
Superior weather protection
Long-lasting flexibility
No primer required before painting
Watertight seal with a 10-year guarantee*
Adhesion to wet or damp surfaces
Non-bubbling
Better curing and extrudability (>5°C) with no slump
Paintable with water-based paints after product skins in 60 to 90 minutes
Low VOC**

Where can this product be used?
Skylights
Walls
Patios
Floors
Fencing
Windows

What materials is this product suitable for?
Concrete
Timber
Metals
Cement sheeting
Brick
Plasterboard
Ceramic tiles
Fibreglass
Most plastics#
#Not suitable on polyethylene, polypropylene or Teflon.  

Ensure substrates are clean and free of oil, grease or lose particles.
Cut seal and nozzle and fit to the cartridge, then place in the caulking gun.
Hold caulking gun at 45° angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
For neat joints, use masking tape on both sides of the joint and remove before skinning.
Tool with a soapy solution before skinning occurs. For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth. See technical datasheet for more information.

Limitations:

#Not suitable on polyethylene, polypropylene or Teflon.  
Cure excess product before disposal.
Not for permanent water immersion or below water-line use. For water immersion please use Selleys Marine Flex   

(9300697125187)

SKU 9300697125187
Barcode # 9300697125187
Brand Selleys
Shipping Weight 0.4000kg
Shipping Width 0.100m
Shipping Height 0.050m
Shipping Length 0.050m
Shipping Cubic 0.000250000m3

Be The First To Review This Product!

Help other Glues Australia users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

More From This Category